Ideal use for:
- Decorative Border Designs
- Warning Marker Signs
- Corporate Logos
- 911 Street Codes
- Transit stations
- Bus or Train Terminal "Stand Behind Yellow Line"

Dust Collection Filter
- Efficiency up to 99.3% at .3 microns
- Washable Exterior
- Fire Retardant
- Teflon Coated so Dirt won’t stick versus bag filters that can tear or wear.
- Self cleaning with air pulse system.
- Anti-static

Vacuum and Motor
- 16 amp motor. DC Brushless Motor so it will not wear like regular brush motors which are standard. Rated for 5000 hours compared to 500 hours of a brush motor.
- Runs on 120 volt.

Machine Itself
- Thompson Valve II Metering System – Best on the market for adjusting blasting media for wearability and is Tungsun lined.
- 1 cubic foot LAGRANGE Pressure Pot that refills automatically when trigger is released. You do not need to stop machine like others in the market. Maximum PSI on Pot is 115 psi
- Easy to use Dust Clean out compartment with 1 clamp removal
- Large Pneumatic casters and tires for easier transportation with Locks.
- Wikerson Strainer Dryer – High quality to minimize moisture in machine in order to prevent clogging.
- Liquid Oil Filled Pressure Gauge – High quality since these are items that typically don’t last as long as this will and also more accurate and dependable.
- Quick Connects for all hoses for ease of use.
- Built in Storage Bin for hoses or tools.
- Brushless Switched Reluctance Design on motor
- Light weight at 400 pounds
- Apollo Control Valves
- Safety Rail to protect valves.
- 3/16” Air Nozzle
- All Clamps are stainless steel and carry a Lifetime Warranty.

CFM Requirements
- Average CFM compressor needed of around 25 CFM. 20 to 40 CFM Compressor is ideal.
PSI Requirements
- Machine will run on various PSI setting which can be adjusted by your regulator pressure gauge. Depending on material to blast 50 to 75 PSI is ideal.

Safety Features
- Secure Safety Trigger will not activate unless manually pressed.
- Screened media fill area with screen that allows 60 grit size media or smaller in diameter.
- Hose Whips for all air hoses coming off machine.

Bob Williams, Operations Manager
Stampcrete/Logocrete
Liverpool, New York

Dear Bob:

Today I have finished compiling data on our earlier testing of the new machine for sandblasting, and I’m happy to inform you that, as we thought, the tests bear out the fact that the process is as close as possible to harmless.

After taking the tags obtained in the testing process and comparing them to OSHA’s guidelines on irritant dusts, silicosis standards, and other respirable dust studies, it is apparent that using the machine is safer than walking on the beach on a windy day.

Results are as follows:

TAG ONE:
Test Duration: Four minutes, fourteen seconds.
At no time during this test did the real-time particulate concentration in the immediate vicinity of the user exceed OSHA’s PEL, TWA, or STEL limits, actual numbers below:

TAG ONE:
Maximum real-time exposure, during four-minute duration of use, reached 14 micrograms per square meter, well below the OSHA limit.

Sincerely,

Zane Cofield, Senior Consultant
The Cofield Consulting Group
Rome, New York