This
concrete paving system is a cast-in-place monolithic
slab with integral color pigments, together with color
hardeners. The concrete mix design is a 4,000 psi (29mpa)
concrete mix design, reinforced with Stampcrete fibers
and placed according to ACI standards. Prior to using
the 5-foot seamless texturing tools, the surface is
treated with either a clear liquid or colored powder
release agent. The surface is then textured and allowed
to cure 10 to 18 hours. Different designs can be achieved
by the use of a concrete saw (i.e. circles, diamonds,
borders, etc.). The surface is then marbelized by the
use of colored etching stains; one or more may be used
per application. The surface is then sealed with two
coats of sealer to protect it
from fading, stains, and nature's elements.
TRAINING
SEMINAR OVERIEW
Day 1:
Meet the Stampcrete
team for the show. A general overview will be given
as to how the seminar will progress and a question and
answer session will conclude before the show begins.
We'll start the day
showing the Traditional Stampcrete system, poured at
either 6 or 8 inches. Once the concrete truck pulls
up, the specified amount of Integral Color is added
to the truck according the yardage poured, and mixed
until thoroughly distributed throughout the concrete.
Pour and place the concrete and allow to start setting
up before applying your Release agent.
Then you will get a
chance to get on the stamps and see how easy it really
is. We will show various patterns, but particularly
the more popular patterns since you will run into using
these more often. After stamping, well break for lunch
and one of the Marketing Representatives will go over
our literature and benefits to the Stampcrete System.
There are many avenues and options that Stampcrete can
provide to start your success in stamping. You will
also receive all types of brochures and other information
to start your information guide.
The afternoon, in most
cases, will show a demonstration of the Mirage stamp
overlay system as well as the Re-Do-It resurfacing system.
Here you will have the chance to see just how easy you
can take an existing plain concrete surface and make
it look as decorative as your mind will let you take
it. We will show some stamping designs as well as a
plain troweled surface.
At the conclusion of
the day, we will give an overview of the day's events
and also a question and answer session to close the
afternoon.
Day
2:
On the second day,
we'll wash off the release agent with a hose and scrub
brush until we have reached the effect we are looking
for. Then we'll use some patina stains to show another
aspect of decorative concrete.
We'll conclude the
day by sealing the projects to show their finished appearance.
Don't forget to bring your cameras!
|
