Traditional Stamping Steps

  • Step 1


    Form the area you plan on pouring and stamping accordingly

  • Step 2

    Adding Color

    When using integral color, add the specified amount of color per yard as premeasured by the bucket, and have them mix for a minimum of 5 minutes or until mixed thoroughly.

  • Step 3

    Bull Floating Concrete Surface

    Bull floating concrete surface with Integral Color, you don’t have to over work the surface which is a common problem with Color Hardeners in freeze thaw environments. Bull float the surface until it closes up and you’re ready to stamp. (Color Hardener instructions listed under Process of Seamless Texturing)

  • Step 4

    Applying Release Agent

    Applying release agent when the concrete is ready to stamp, apply your desired release agent to the surface with either a brush, burlap bag or by hand. Your release agent acts as barrier between the concrete and your stamps, while giving you that antique appearance after washing off.

  • Step 5

    Stamping Concrete

    Stamping concrete shown here is the Ashlar Slate pattern. The benefit of the Stampcrete stamp would include the authentic appearance you receive as well as the durability in the stamp it self. This gives the contractor more time to complete a quality project as shown.

  • Step 6

    Washing Off Excess Release Agent

    Washing off excess release agent using a regular garden hose and scrub brush, remove the desired amount of release to your liking, leaving enough to accent your joint lines and achieving an antique appearance.

  • Step 7

    Sealing Surface, Two Coats

    Sealing surface, two coats after the surface is completely dry and free of moisture, apply two coats of either solvent base sealer. This can be either sprayed on with a Chapin Sprayer or rolled on.

  • Step 8

    Finished Stampcrete Surface

    Finished Stampcrete surface what you have as a result is a aesthetically beautiful surface that anyone would be proud to own.